ScanJuggler en
Innen: amigaspirit.hu - pegasos.hu Wiki
Ugrás a navigációhozUgrás a kereséshez
Az oldal magyar nyelven itt elérhető. A ScanJuggler XAGA is a scandoubler (Lite) / flickerfixer for some Amiga models equipped with AGA chipset.
Specifications
ScanJuggler XAGA Lite (rev.2)
- Scandoubler for A1200 and A4000(D) machines
- Provides better analog image quality than the original chipset
- When fitted inside an A1200, it fits below the HDD frame and among other add-on cards
- Max. resolution: 768x580
- Color depth: 24/21 bit (depending on color mode)
- PAL/NTSC/Euro36 compatible
- Slightly reduces interlace blinking
- Also supports Productivity/Euro72/DBLxxx screen modes
- Supports border blanking
- HW support for DDC/CI (software support needed)
- Other special extras (TBA)
- Firmware and FPGA logics updateable from AmigaOS
- Compatible with PAL/NTSC/1Dx/2B machines
- Analog VGA output
Price: international price to be announced
ScanJuggler XAGA (rev.3)
- Scandoubler and Flickerfixer for A1200 and A4000(D) machines
- Provides better image quality than the original chipset
- When fitted inside an A1200, it fits below the HDD frame and among other add-on cards
- Max. resolutions, eg.:
- PAL: 1536x576 (SHiRes support)
- Custom screen modes: 1280x720, 1024x768
- Color depth: 24 bit
- PAL/NTSC/Euro36 compatible
- Also supports Productivity/Euro72/DBLxxx screen modes
- Supports border blanking
- HW support for DDC/CI (software support needed)
- Expandable (expansion options TBA)
- Other special extras (TBA)
- Firmware and FPGA logics updateable from AmigaOS
- DVI-I output (analog VGA and HDMI possible with a passive adapter)
- Est. availability: soon
Price: international price to be announced
Connectors
VGA (default)
ScanJuggler XAGA Lite comes with a VGA connector by default:
- Fits both into A1200 and A4000
- In A1200 it fits together with the ELBOX KEY V2.0 and the HDD frame
- In A4000 it doesn't collide with the card put in the lowest slot
- Has a button to control the SJ
- Doesn't support DDC/CI
The connector for ScanJuggler XAGA is similar.
SJ Switcher Module/VGA
- Fits below the floppy in an A1200, or into a slot-backplate in an A4000/boxed A1200
- Provides VGA output
- Connects to the main card with a shielded cable
- Has an input connector for your BVision or CVision
- Switching between the inputs is automatic or can be controlled with a button on the module
- The button can also be used to control other functionality of the ScanJuggler XAGA's
- Supports DDC/CI
- This one is mainly for the ScanJuggler XAGA Lite, but can also be used with the normal XAGA version in case only the analog VGA output is needed
Price: international price to be announced
SJ Switcher Module/DVI
.jpg)
_inside_A1200.jpg)
- Fits below the floppy in an A1200, or into a slot-backplate in an A4000/boxed A1200
- Provides DVI-I output (analog+digital) (It can also be converted to VGA or HDMI using simple adapters.)
- Connects to the main card with a shielded cable
- Has an input connector for your BVision/CVision
- Switching between the inputs can be automatic or controlled with a button on the module
- The button can also be used to control other functionality of the ScanJuggler XAGA's
- Supports DDC/CI
- This one is mainly for the ScanJuggler XAGA
- (Can also be used with the ScanJuggler XAGA Lite - no digital output is available this time -, in case you plan to switch to the ScanJuggler XAGA later.)
- The switching is done on the analog domain, thus image of the BVision/CVision is available only through the analog portion of the DVI-I output connector! (It does not digitalize the image of the Bvision/CVision card.)
Price: international price to be announced
SJ HDMI Module A1200/RFM
- Provides HDMI output for the ScanJuggler XAGA (It can be converted to DVI-D with a simple adapter.)
- To be assembled in place of the A1200 RF modulator
- Connects to the main card via a bridge (included)
- Also has the button for control of certain functions of the SJ
- Supports DDC/CI
Ordering
Ordering will be possible after international prices are announced. Meanwhile, you can express your interest for this product or request additional information via e-mail: scanjuggler-at-gmail.com
You can also subscribe to the ScanJuggler Announcement List [1]. - sorry, it isn't working now.
